Infrared Rejection and Total Solar Energy Rejected

Infrared Rejection and Total Solar Energy Rejected

“Total Solar Energy Rejected (TSER) On Angle & IR Rejection”

1. Total Solar Energy Rejected (TSER) On Angle is not an industry-accepted measure of a films performance and therefore cannot be used to assert the superiority of one film product over another. The NFRC is the only independent agency to rate window performance, and
Total Solar Energy Rejected (TSER)” On Angle is not recognized by them as a measure of performance.

2. All film products, indeed all glazing systems, have improved total solar energy rejection as the sun climbs higher in the sky and sunlight strikes a vertical glass window less directly. When the sun is directly overhead, all vertical windows (with or without film) have 100% total solar energy rejection.

3. Sunlight (solar radiation) is made up of 2% ultraviolet, 49% visible light, and 49% infrared energy, and ALL of this energy generates heat if it enters a room through a window. Blocking 97% of the infrared would NOT block 97% of the heat, but only 97% of 49%.

4. No window film, in fact, blocks 97% of the sun’s infrared energy. Blocking 97% of the infrared at a single wavelength does not mean that all the other wavelengths of infrared are being blocked at that level. Be skeptical of metering devices that selectively measure at very narrow wavelength bands, for they can falsely represent the whole picture.

Get the Supremacy of Anti-Shatter Film for Your Toilet Shower Screen

In today’s  21st century, most things are shifting away from the traditional methods. One good example is the evolution of cellular phones that have almost completely changed from keypad to touch options. In the same way, most smart homes, hotels and leisure centers are opting for shower cubicles instead of the old-fashioned shower head in their bathrooms to ensure an added level of elegance in their clientele’s bathing. True enough, even for everyday homes, shower cubicles offer a different feel of the bathing experience, especially since most of the cubicles are made of glass panels to impart a modern, finished and bright appearance.

However, there is a major drawback on these shower screens. Glass shower screens are always prone to shattering into thousands of pieces upon impact of force or collision. So, how can one overcome this situation? Read ahead to get a detailed solution.

Anti-Shatter Film: The Perfect Solution for Your Shower Screen

Having broken glass replaced can be costly, and so to avoid burning a hole in one’s pocket, most people opt for anti-shatter film in order to prevent the cracking of their glass shower screen in the first place, although this is not merely a matter of money. Shattered glass pieces from the shower screen in the event of an accident can pierce deeply into the body and cause harm to you or your loved ones.

There are various other benefits for application of anti-shatter film over the shower screen of your toilet or washroom. Let’s show you what these are:

  • In the event of a breakage, anti-shatter films hold the glass pieces of your shower screen together, avoiding cuts and injuries and also making the replacement process later on safer and easier.
  • Some anti-shatter films come with tint and can help diminish glare for better visibility.
  • Spontaneous breakage, the breaking of glass panels even without any apparent reason or anybody touching it can happen even to tempered glass shower screens. This is due to the molecules in the glass expanding and collapsing from the changes in surrounding temperatures. Having anti-shatter films installed can give you peace of mind that you are constantly protected and not left defenseless while showering.

Ensure that your bathroom or shower screen is not only beautiful but also safe by having anti-shatter films installed. Shower at peace even when completely surrounded by glass, with the knowledge that you and your family have the toughest defense in the industry against any unforeseen circumstances.

Can’t wait to have this effective security installed on your own shower screen? Explore a wide range of LLumar anti-shatter film sunder a budget friendly price at 100% made in USA, protect your glass shower screen whilst still enjoying the highest level of optical clarity without the problem of shadowing or yellowing over time.

How Do One-Way Mirror Window Films Work?

In almost all of cop-based movies, there’s always that scene where the “bad guy” is being interrogated in a room while the officers observe him through the other side of the glass, without them being seen. Have you ever wondered about the science behind this mirror-like effect and its other uses outside of the interrogation rooms of police headquarters?

While the science behind it may be complicated, the one-way mirror window film, which causes the mirror-like effect, has some very practical uses – uses that can greatly benefit your own home or building. Let’s answer your curiosity and discuss more on how this special window film works.

The Science Behind One-Way Mirror Window Films

Basically, a one-way mirror window film imparts an illusion that one side of the glass is a reflective mirror whereas another side is a see-through glass. In simpler terms, one side of the glass will act as a mirror to a person whereas the opposite side of the same panel will look like a plain transparent glass.

A one-way mirror window film works through an abstract mix of two basic principles:

1. Manufacturing Smartness: While manufacturing, a simple transparent glass window is coated with a film having a thin layer of reflective metal – aluminum or silver. But the catch here is that only half of the aluminum molecules are used as compared to that of a normal mirror. It is necessary to partially reflect the light whilst allowing partial light to transmit through the surface.

2. Lighting Factor: The two areas between which the mirror will be installed will have a difference in their light intensity. One of the areas should be lit brightly, whereas another should be darker as compared to the former in order to get the best results. The person at the well-lit area will see the reflection as that of an ordinary mirror,whereas the person at the darker area will see the mirror as a transparent glass, fully able to observe the scene behind the one-way mirror.

Use in Real-Life Applications

In the recent years, the demand for one-way mirror window films have increased significantly throughout Singapore and other countries,due to its numerous benefits in residential and commercial applications. Some of the popular areas of its usage are:

Interview/Interrogation Rooms: As mentioned at the start, the one-way view achieved from the film is ideal for observing the behavior of the subjects or people without letting them be aware of the observer’s presence.

Residential and Commercial Windows: Troubled by how close the windows of your neighbors are to yours or of how easily passers-by see into your windows when you’re working? One-way mirror window films can offer the much-needed privacy while still allowing you to see the view outside.

Automotive Vehicles: During daytime, one-way mirror window films prevent outsiders; either pedestrians or other drivers from taking a peek into the interior of your car, acting as an added protection to whatever valuables you have inside.

Amazed so far of the numerous benefits and applications for one-way mirror window films? Achieve a whole new level of privacy without compromising your view and protect yourself from prying eyes by having them installed from Ensure utmost safety of your home, office and vehicle today for a more relaxed feel and constant peace of mind.

Enhance Your Privacy With Frosted Window Film

Importance of a Frosted Window Film

Are you tired of battling with the prying eyes of neighbors and outsiders? Are you seeking for an effective solution to keep your privacy intact?

Be it a home or an office, every occupant often desires for privacy in the room. Doors, windows and partitions made of glass often cause not just a sense of constantly being watched but also disturbance from the movements from the other side of the glass. A great solution in dealing with all of this without ruining the aesthetics of your interior is the use of frosted window films.

Why Frosted Window Film?

Available in a wide array of styles, sizes, colors and designs, frosted window films offer a concrete solution for added privacy by preventing vision and disturbance both during day and night while still allowing a percentage of light to pass through. Frosted window films can be installed over glass windows, doors, partitions and shower screens for added privacy.

Features of Frosted Window Film:

  • Enhanced privacy and security by keeping unwanted eyes away.
  • Still allows a good percentage of sunlight to enter the room.
  • Ideal for installing over any flat glass surface.
  • A lot cheaper that getting curtains or blinds.

Moreover, frosted window film are easy to install even without the assistance of a window treatment professional. The internet is full of an extensive number of DIY videos to assist you in the installation of these frosted window films if you want to do it yourself.

7 Steps To Install Frosted Window Films Like A Pro:

  1. Clean the surface thoroughly with a soft cloth. Use cleaning solution, if necessary.
  2. Cut an extra 2 cm from height and width of the film as per the size of the surface.
  3. Gently hold the back of the frosted window film and remove the clear lining film. Spray some water solution to the back of the frosted window film as well as your fingers. Attach a small piece of tape to either side of the frosted window film at one corner to peel them apart a little.
  4. Thoroughly spray the surface of the glass with the same slip solution.
  5. Keep the adhesive side of the film over the glass and gently slide to position properly.
  6. Spray again the face of the frosted window film with the slip solution and push out the soapy water from behind the film through the help of a squeegee.
  7. Carefully cut-off any excess film from the sides using the knife.

If you feel the need to have an actual professional do the job for you, avail frosted film in Singapore by logging in to or call @ 6-2888-323 to avail premium-quality frosted window film installation and other sorts of window films from LLumar at very cost-effective prices.

5 Most Popular LLumar Window Films in Singapore in 2015

5 Most Popular LLumar Window Films in Singapore in 2015

As a sunny and tropical country, one common situation in Singapore homes, offices and buildings is the problem with getting too much sun. The bright light might oftentimes be welcomed, but the uncomfortable heat and glare that comes with it isn’t so. It is difficult to rest and relax at home or concentrate at work when you’re constantly bothered with the stifling heat or distracted by the sunlight shining directly at your eyes.

The installation of window films is therefore a popular solution, helping even in cutting down your cooling costs, but with over dozens of different film models, colors and specifications of window films in the market, selecting the best one for your glass is no easy task. And so we have listed down for you the 5 most popular LLumar Window Film models installed in Singapore in 2015 and the difference in their various applications.

1. LLumar DR25SRCDF (Warm Grey)
Type: Solar Film
Origin: Made in USA

Data Specifications:
Visible Light Transmittance: 22%
Total Solar Energy Rejected: 65%
Ultraviolet Ray Protection: 99%

This wonder film can be installed pretty much anywhere. It is often light enough to be permitted by condominium managements but can still cut off 76% of glare. Mostly installed in areas where excellent heat and glare reduction are required, the film gives off a warm to neutral daylight ambience and a very low interior surface reflectance at night.

Popular Applications: Condominiums, HDB, Landed Properties, Offices, Restaurants, Commercial and Government Buildings

2. LLumar RN07GSRHPR (One-Way Mirror)
Type: Reflective Solar Film
Origin: Made in USA

Data Specifications:
Visible Light Transmittance: 5%
Total Solar Energy Rejected: 84%
Ultraviolet Ray Protection: 99%

This films unique one-way mirror effect adds privacy, without blocking the view from the inside. Even without blinds or curtains during daytime, outsiders and neighbors are only able to see their own reflection through the glass. It also has the highest heat and glare rejection rate amongst the other films, allowing significant energy savings from lower cooling costs.

Popular Applications: HDB, Landed Properties, Offices, Restaurants, Commercial and Government Buildings

3. LLumar AVS70SRHPR (Neutral)
Type: Solar Film
Origin: Made in USA

Data Specifications:
Visible Light Transmittance: 71%
Total Solar Energy Rejected: 52%
Ultraviolet Ray Protection: 99.9%

This specialty film provides a virtually invisible appearance, and is the top choice for applications where optically clear glass panels are required, like condominiums with particular management requirements. Despite its lightness, the film can still significantly reduce heat build-up and prevent the fading of your furniture and flooring from ultraviolet rays.

Popular Applications: Condominiums, Landed Properties, Offices, Restaurants, Commercial and Government Buildings, Cars

4. LLumar RHE20ERHPR (Silver)
Type: Exterior Solar Film
Origin: Made in USA

Data Specifications:
Visible Light Transmittance: 14%
Total Solar Energy Rejected: 83%
Ultraviolet Ray Protection: 99.9%

Applied to the exterior face of the glass especially in difficult to reach or install areas, this film provides superior heat rejection and glare reduction performance, reflecting away sunlight before they even pass through the windows. It has a strong scratch-resistance coating to help withstand exposure to wind, rain and other external factors.

Popular Applications: Skylight, Car Porch, Patio Glass Overhead, Landed Properties, Commercial and Government Buildings

5. LLumar NRM55PS4 (Glacier)
Type: Frosted Privacy and Anti-Shatter Safety Film
Origin: Made in USA

Data Specifications:
Visible Light Transmittance: 67%
Total Solar Energy Rejected: 36%
Ultraviolet Ray Protection: 99%

This 3-in-1 film provides privacy from its frosted appearance, reduces heat and most importantly, prevents the shattering of glass in the event of accidents and forced entries. It securely adheres to glass surfaces to resist impact and helps keep particles safely in place if glass is broken, preventing injuries, damage to property and loss.

Popular Applications: Bathroom Doors, Toilet Shower Screens, Corridors and Walkways, Partitions, Kitchens, Offices, Commercial and Government Buildings

Still can’t decide on which window film to use for your glass? Not to worry! We can do a FREE site assessment and quotation for you. Nothing still beats the advice and suggestion of a certified window film professional.

Just call Window-Cool at tel. 6-2888-323 or drop us an email at
Want to know more? Visit us at

Add Privacy, Protection and Elegance to Your Home with Privacy Film

If privacy is your main concern, privacy window film is definitely an option you won’t regret considering. Gone are the days when window shutters and draperies were used to create privacy in one’s home. The installation of privacy films is more affordable and convenient,as compared to other solutions. Apart from being inexpensive, privacy films require very little maintenance in the long run.

In order to provide privacy to your house, it has become essential to install the best quality of privacy film available in the market. Many homeowners in different parts of the world understand the importance of privacy films and are coming forward for the installation in their homes. These films have become essential for homeowners to protect their houses from peeping onlookers and curious neighbors. In addition, these films also make your beautiful home cozy and warm by reflecting away direct sun rays that can cause damage to your skin, as well as to the furnishings of your beautiful home. The main task after deciding to opt for installation of privacy film is the selection of the right model to use.

Benefits of Installing Privacy Film in the House

Without incurring a huge bill, privacy film adds protection, elegance and privacy to your home. Whether you want to get rid of annoying peeping neighbors or tired of onlookers, privacy film is the ultimate solution to your problem. Windows having privacy film allow only one-way vision,hindering outsiders from looking in and allowing daytime passers-by only a view of their own reflection. Apart from providing privacy to the homeowners, these films are also known to provide a number of benefits. Privacy films can be used to prevent heat gain to ensure the comfort and coziness of your home. They also significantly reduce the disturbing glare from direct sunlight.Other advantages of installing privacy films are given below:

  • Provide privacy as desired.
  • Protect from too much solar heat.
  • Prevent fading of furnishings and floorings from UV rays.
  • Allow cost and energy savings.

You can also decide on the amount and percentage of visibility of your privacy films since there are a number of options available in the market. From semi-translucent to completely opaque films, you can select the one best fitted for your needs and requirements.You get to choose the level of privacy you want for your home.

Explore an Elite Range of Privacy and Window Films

In need of more privacy for your home? Window-Cool is the best place for you to find the perfect solution.Since our establishment in 1999, Window-Cool has been committed to provide top-quality blinds, shades and privacy window films in Singapore at the most reasonable prices. Backed with extremely professional and a dedicated team, Window-Cool willprovide you the best possible installation service. For more information, visit Window-Cool at